 |
SAE J1962 (with FEPS) to CarDAQ2534
Cable |
CD2534-J1962-FEPS |
 |
Serial (DB9) to CarDAQ2534 Cable |
CD2534-RS232-STD |
 |
Crossover Ethernet (RJ45) to
CarDAQ2534 Cable, for Laptops |
CD2534-ENET-STD |
 |
CarDAQ2534 Ethernet Wall Kit (RJ45 to
RJ45) |
CD2534-ENET-WALL |
 |
J1962 to banana jack/multiple J1962
Cable |
J1962-BREAKOUT |
 |
The MVCI-to-heavy-truck adapter allows
CarDAQ-Plus to communicate on J1939 and J1708 networks. It supports
most standard Deutsche 6-pin and 9-pin cables. Using the standard
CarDAQ-Plus driver, you create programs to reprogram ECUs, log data,
or monitor bus traffic. We're recommending these extensions for
standardization in SAE J2534-2. |
CDP-HTA |
 |
TempDAQ is a rugged
temperature-compensated amplifier that supports up to 6 input
channels. It rescales the voltage signal from K-type thermocouples to
use the full dynamic range of CarDAQ's A/D subsystem. This permits
highly accurate in-vehicle temperature measurements: between -200C and
+1250C, with better than 1C resolution. Alternatively, select the BNC
input to pass a signal (unamplified) directly to CarDAQ. The A/D
subsystem can sample up to 6 voltage signals with range 0-27V, at
2kHz, with 12-bit resolution. The user can set each channel separately
for temperature or "raw" voltage measurement. |
TempDAQ |
| |
Vehicle interface cable |
CDP-J1962 |
| |
CompactFlash 802.11 WiFi wireless |
CFWIFI |
| |
CompactFlash 256mb storage |
CFMEM256 |
| |
CompactFlash 512mb storage |
CFMEM512 |
| |
CompactFlash 1gb storage |
CFMEM1024 |
| |
CompactFlash 4gb storage |
CFMEM4096 |
